:	Jun 16, 2004

.

Remove the driver side register trim panel.   Release the 2 clips.   Disconnect the electrical connector.

.

:   Do not disassemble further if the component is removed for access only. Remove the register.   Release the 4 clips.

.

Remove the headlamp switch.   Remove the 4 Torx screws.

.

Install the headlamp switch.   Tighten the Torx screws.

.

Install the register.   Secure with the clips.

.

Install the driver side register trim panel.   Connect the electrical connector.   Secure with the clips.